Add SNMP monitor(such as switches)
Back
*
IP
*
SNMP Port
*
SNMP Version
version2c
version1
version3
*
SNMP Community
OutOctets OID
(OID is generally 1.3.6.1.2.1.2.2.1.16. X, where X is generally interface #. Please fill in multiple lines. If you fill in 1.3.6.1.2.1.2.2.1.16, the system will automatically obtain all interface traffic by default)
InOctets OID
(OID is generally 1.3.6.1.2.1.2.2.1.10. X, where X is generally interface #, please fill in multiple lines. If you fill in 1.3.6.1.2.1.2.2.1.10, the system will automatically obtain all interface traffic by default)
Byte OID sent per second
(If this value is filled in, The system does not need to take the difference in outlet flow rate every 3 seconds to calculate the outlet rate)
Byte OID received per second
(If this value is filled in, The system does not need to take the difference in inlet flow rate every 3 seconds to calculate the inlet rate)
Disk occupancy OID
(You can only fill in the disk usage OID. It is also supported to fill in expressions to calculate disk usage, such as: 100- [1.3.6.1.4.1.2011.5.25.31.1.1.13.1.3], and the OID in the expression should be enclosed in square brackets.)
CPU usage OID
(You can only fill in the CPU usage OID. It also supports filling in expressions to calculate CPU usage, such as: 100- [1.3.6.1.4.1.9.2.156.0], and the OID in the expression should be enclosed in square brackets.)
Memory usage OID
(You can only fill in the memory usage OID. It also supports filling in expressions to calculate CPU usage, such as [1.3.6.1.4.1.9.9.48.1.1.1.6]/[1.3.6.1.4.1.9.9.48.1.1.1.5] * 100. The OID in the expression should be enclosed in square brackets.)
Equipment operating temperature OID
Interface Status OID
(Generally 1.3.6.1.2.1.2.2.1.8)
Equipment operating voltage OID
Voltage Unit
Remark
*
Warn Level
*
Monitor Status