*Device IP

*SNMP Port

*SNMP Version

version1

version2c

version3

*SNMP Community Name

Outbound Traffic OID (OID is usually 1.3.6.1.2.1.2.2.1.16.X, where X is typically the interface index. Please use newlines for multiple entries. If 1.3.6.1.2.1.2.2.1.16 is entered, the system will automatically fetch traffic for all interfaces by default)

Inbound Traffic OID (OID is usually 1.3.6.1.2.1.2.2.1.10.X, where X is typically the interface index. Please use newlines for multiple entries. If 1.3.6.1.2.1.2.2.1.10 is entered, the system will automatically fetch traffic for all interfaces by default)

System Description OID (Usually 1.3.6.1.2.1.1.1.0, or device name OID, etc.)

Tip: Disk usage, CPU usage, Memory usage, Operating Temperature, and Uptime OIDs use snmpget by default. If you want to use snmpwalk, you can write aggregate functions like avg[oid] for average, max[oid] for maximum, min[oid] for minimum, sum[oid] for sum, or count[oid] for total count.

Disk Usage OID (You can enter the Disk Usage OID alone or use an expression to calculate it, e.g., 100 - [1.3.6.1.4.1.2011.5.25.31.1.1.13.1.3]. OIDs in expressions must be enclosed in square brackets)

CPU Usage OID (You can enter the CPU Usage OID alone or use an expression to calculate it, e.g., 100 - [1.3.6.1.4.1.9.2.1.56.0]. OIDs in expressions must be enclosed in square brackets)

Memory Usage OID (You can enter the Memory Usage OID alone or use an expression to calculate it, e.g., [1.3.6.1.4.1.9.9.48.1.1.1.6]/[1.3.6.1.4.1.9.9.48.1.1.1.5]*100. OIDs in expressions must be enclosed in square brackets)

Operating Temperature OID

Interface Status OID (Usually 1.3.6.1.2.1.2.2.1.8)

System Uptime OID (Usually 1.3.6.1.6.3.10.2.1.3.0, return value is in seconds)

Remark

*Alarm Level

*Monitor Status

Add SNMP Device Monitor (e.g., Switches, Firewalls)

Test OID Result